Earthing & Lightning Protection Clamps

Earthing & Lightning Protection Clamps

Backplate Holdfast

It is used when the installation requires the tape to be secured 75mm away from the face of the building.

Heavy Duty Tape Clip (DJC)

Petunia tape clips hold the flat conductor flush to the surface.

Ground Wire Connector Clamp

Brass Bolted Type Connector for connecting of two run and tap copper wire

"C" Crimp Type Connector Clamp

"C" clamps are used for connecting of two wire conductor. "C” Crimp Connectors will accept a range of stranded or solid circular conductors

Ground Wire Structure Clamp

Brass one hole tower clamps are suitable for holding conductors on steel structure.

Junction Test Clamp

These clamps are used for straight connection of tapes. Being joints, it can also used as testing points for the network by disconnecting the joints. These earthing accessories are manufactured using high quality raw material of various diameters.

PVC Covered Heavy Duty Cable Clip

ThePVC Covered heavy duty Cable Clip helps organize wires and can hold hydraulic hoses, wire harnesses and cables.

One Hole Cable Clip

We offering One Hole Cable Clip which is widely appreciated for long durability, dimensional accuracy, strong tensile strength, sturdy construction and outstanding performance.

Metalic Tape Clip

Petunia tape clips hold the flat conductor flush to the surface.

Parallel Ground Wire Connector Clamp

These Bolted Type parallel connector clamps are used for making connection between two wire conductors. They are manufactured from brass with steel screws.

Bolt, Nut, Washer and Spring Washer

Fasteners in earthing systems come in different sizes and materials. To make it easy, we’ve compiled the data below as a guide for figuring out.

Cross Wire Connection Clamp

These Petunia four way connectors are suitable for crossing over two cable, making straight through joints in a continuous network.

Ground Wire Structure Clamp

Brass one hole tower clamps are suitable for making of electrical connection between the conductor and steel structure.

Rod to Tape Clamp

Petunia Rod to Tape Type ‘U’ Bolt Clamps are designed to join 50 x 10 conductor tape to the earth electrode / rebar, without the need to drill the tape.

Rod to Tape Clamp

High strength copper alloy 'U' bolt clamp designed to provide a high quality, low resistance connection between solid circular or stranded conductor and an earth rod or rebar.

Earth Bonding Point

The earth bonding points, are used for making electrical connection of the rebar to the earthing or lightning protection system. It is provide convenient earth system connection point in concrete structures

Ground Wire Structure Clamp

Brass one hole tower clamps are suitable for holding conductors on steel structure.

Junction Test Clamp

These clamps are used for straight connection of tapes. Being joints, it can also used as testing points for the network by disconnecting the joints. These earthing accessories are manufactured using high quality raw material of various diameters.

Tape to Earth Rod Connector Clamp (GRC-B)

Brass tape connector rod clamps are suitable for for use with end of copper conductor to be connected with earth rod, solid copper or stainless steel earth rods.

Bimetallic Washers

Bimetal (Al-Cu) washer for prevention of corrosion between copper alloy clamps and

galvanized steel structures.

Tinned Copper Cable Lug

Crimping type copper tinned cable lug with a hole are used for make a easy connection to structures.

Universal Cable Connector (UCC)

These are used for connecting cable conductors in a test point as part of the lightning protection system. The base has a countersunk hole in the middle for securing the connector to the building surface

PVC Covered One Hole Cable Clip (TCWF)

The PVC Covered One Hole Cable Clip helps organize wires and can hold hydraulic hoses, wire harnesses and cables.

Cable Clip (TEW)

Petunia offer these Cable Clips where a long durability, dimensional accuracy, strong tensile strength, sturdy construction and outstanding performance required.

Earth Boss (EB)

The Petunia earth boss is designed to provide an earth connection point on a steel structure. The boss is welded onto steel vessels, tanks and other structures.

Ground Wire Rebar Clamp (RBC)

These Rebar Clamps designed to be used for fixing wire to a steel reinforcement rods.

Office

No.11, Second Floor, 2nd St., SARAFRAZ St., BEHESHTII Ave., TEHRAN, IRAN.

P.O.Box: 15875-4834

Tel: +98 (21) 42019

        +98 (21) 43057000

        +98 (21) 88753898

Fax:+98 (21) 88745214

Email:  info@petuniaco.com

Factory

No.1053,  Alley 4/2,  KHAIAM Blv., EBN SINA Blv., ABAS ABAD industial zone, KHAVARAN Road, TEHRAN,  IRAN,

Tel: +98 (21) 43057300

Fax:+98 (21) 88745214