Electrical Connector Clamps

1 fas

Connection Wire Clamp (CTEN)

Specification
Connection Wire Clamp CTEN
Description

Petunia connection wire clamp is suitable for connecting bare conductor together. This clamp is simple and affordable and easy to install. (According to IEC 62561)

Connection Wire Clamp (DTEN)

Specification
Connection Wire Clamp DTEN
Description

Petunia connection wire clamp is suitable for connecting bare conductor together. This clamp is simple and easy to install. (According to IEC 62561)

2 fas
3 fas

Tape to Wire Conductor Test Clamp (CTCN)

Specification
ape to Wire Conductor Test Clamp CTCN
Description

Petunia tape to wire conductor test clamp is suitable for disconnecting tape from wire in lightning protection system and testing earthing system. This clamp is simple and affordable and easy to install. (According to IEC 62561)

Cross Connection Cable Clamp (SCC)

Specification
Cross Connection Cable Clamp SCC
Description

Petunia cross connection cable clamp is suitable for connecting bare conductor together. This clamp is simple and affordable and easy to install. (According to IEC 62561)

4 fas
5 fas

Cross Tape Clamp (XJC)

Specification
Cross Tape Clamp XJC
Description

Petunia cross tape clamp is suitable for connecting tape to tape conductor. This clamp is simple, affordable and easy to install. (According to IEC 62561)

Cross Bolted Connection Clamp (TXN)

Specification
Cross Bolted Connection Clamp TXN
Description

This is a Cross-Connection Clamp type for the two wires in different sizes. Although the main body is made of copper and the bolts are also made of stainless steel, according to IEC, it should not be buried underground for connections. Acc. to BS 7430 and IEC 62651.

6 fas
7 fas

Straight Connection Bolted Clamp (UCC)

Specification
straight bolted clampuuc
Description

Petunia straight connection bolted clamp is suitable for connecting wire to wire conductor. This clamp is simple, affordable and easy to install.

Bimetallic Tape Connector (BTC)

Specification
Bimetallic Tape Connector BTC
Description

These connectors are used to join aluminum and copper tapes together. This connector is used for connecting aluminum and copper tapes together that prevent galvanic corrosion.

8 fas