Earth Electrical Connector Clamps
"X" Bolted Type Connector Clamp (TXN)
This is a Cross-Connection Clamp type for the two wires in different sizes. Although the main body is made of copper and the bolts are also made of stainless steel, according to IEC, it should not be buried underground for connections. Acc. to BS 7430 and IEC 62651.
Foundation Earth Bonding Point (EPAD)
The Earth Bonding Points are used to make the rebar's electrical connections to the earthing or lightning protection system. It provides convenient earth system connection points in concrete structures. These types of earth bonding points are provided according to BS 7430 and IEC 62651, so they can easily be connected to the earthing system connection wire.
Simple Foundation Earth Bonding Point (EPAS)
This type of Earth Bonding Point is suitable for places where cable lugs are used to create earthing connections. It provides convenient earth system connection points in concrete Structures. The bolts are made of Stainless Steel to have the least amount of corrosion (BS 7430 and IEC 62651).
Structure Earth Wire Connection Clamp (GWN)
Structure Earth Wire Connection Clamps are suitable for making electrical connections between the conductor and steel structure. Petunia structure clamps have high-strength bodies, corrosion resistance, high conductivity, and mechanical strength, to support and pass an electrical current. They are manufactured according to BS 7430 and IEC 62651.
Structure Earth Double Wire Connection Clamp (DGWN)
This Electrical/Support Double Connection Clamp must be firmly tightened by hand using standard tools. The tightening torque required mainly depends on the shape and material of the connector or clamp and the material and mechanical properties of the screws. Material and recommended torque values for fixing screws regardless of the material used for the clamp/connector are chosen according to BS 7430 and IEC 62651
Straight Wire Connection Bolted Clamp (PCC)
The Petunia Straight Wire Connection Bolted Clamps range of mechanical connectors is designed for straight connections on stranded or solid cables. The ferrules are manufactured of brass of suitability of jointing copper circular shaped conductors cores.
Cable Connection Clamp (BCSU)
Brass Bolted Type Connectors are used for connecting two-run and tap copper wire conductors. The Split Bolt Connectors are made of brass and designed to sequence and transport all kinds of conductors in an electric network. Using matched fittings will make your earthing and lightning system convenient and long lifetime. Acc. to BS 7430 and IEC 62651.
Light Cable Connection Clamp (LBCSU)
This brass Lightweight Connector Clamp is also designed for the parallel connection of two wires in the network of earthing systems. The maximum thickness of the wire in this clamp is 35 mm2. Acc. to BS 7430 and IEC 62651.
Earth Boss (EB)
The Petunia Earth Boss is designed to provide an earth connection point on a steel structure. The boss Can be welded or screwed on the steel vessels, tanks, and other structures. It comes complete with a stainless steel dowel, a flat washer, a spring washer, and two nuts. According to BS 74
Earth Rebar Clamp Wire (RBC)
These Rebar Clamps are designed to be used for fixing wire to steel reinforcement in concrete to be deleted , according to BS 7430 and IEC 62651. They have high Strength materials bodies, corrosion resistance, high conductivity, and mechanical strength to support and pass an electrical current.
Earth Rebar Clamp Tape (RBT)
These Rebar Clamps are designed to be used for fixing tape to steel reinforcement in the concrete according to BS 7430 and IEC 62651. They have high strength materials bodies, corrosion resistance, high conductivity, and mechanical strength to support and pass an electrical current.
Static Earth Receptacle (SERP)
The Static Earth Receptacle is used in open areas where a temporary earthing point may be required, such as airfields or petrol Stations. Corrosion resistance, conductivity, and mechanical strength are essential considerations in bond design to ensure an earthing system remains operative for many years.
Cable Connection Clamp (KCC)
"U" Bolt Connection Clamp can be a versatile clamp for making all kinds of connections between wires, rods, and ribs. The body of this clamp is made of brass, and the U bolt is made of stainless steel. Acc. to BS 7430 and IEC 62651.
Parallel Groove Clamp (SMC)
These new design Bolted Type Parallel Connector Clamps are used for making connections between two wire conductors. They are manufactured from brass with stainless steel screws. The body is also designed in such a way that it can withstand a lot of pressure. Acc. to BS 7430 and IEC 62651.
"C" Crimp Connector (CC)
"C" Clamps are used for connecting two-wire conductors. "C" Crimp Connectors will accept a range of stranded or solid circular conductors. "C" connector clamps are made from pure copper, with corrosion resistance, and high conductivity, in order to support and pass fault current. According to BS 7430.
Pipe Bond Clamp (PBC)
The Petunia Pipe Bonding Clamp is suitable for connecting metallic pipes to the earthing system and is made of stainless steel that is resistant to rust and corrosion.