Copper Bonded Steel Ground Rod & Accessories
Extensible Copper Bonded Steel Ground Rod (GR-CB)
Copper Bond Earth Rods are the ideal driven earth electrodes, as they offer the installer an economical and efficient earth rod Earthing system. Pure electrolyte copper is uniformly molecularly bonded into a high tensile steel core to a minimum thickness of 0.254 mm. As standards UL 467 and IEC 62561, "The copper covered shall not be less than 0.010 inch {0.254mm) thick at any point and shall comply with the adherence requirement and bending requirement thus ensuring excellent corrosion resistance and eliminating electrolytic action."
Copper Bonded Steel Earth Rod Coupler (GRU)
Petunia Couplings have a high copper content to ensure excellent corrosion resistance. They facilitate deep driving and also protect the rod threads while using the driving head.
Copper Bonded Steel Earth Rod Driving Head (GRS)
These reusable high-tensile Steel Driving Heads are suitable for driving Earth Rods by hand or with a power hammer. They are used for threaded or non-threaded Earth Rods.
Copper Bonded Steel Earth Rod Driving Point (GRDP)
These spikes protect the tip of the earth rods and let the installer push the rods to the earth easily when driving.
Copper Bonded Steel Earth Rod Eye Nut (EES)
Copper Bonded Steel Earth Rod Eye Nut provides a static earth point when attached to the top of a threaded Copper Bond Earth Rod.
Non- Extensible Copper Bonded Steel Earth Rod (GR-NE)
Non-extensible Copper-Bonded Steel Earth Rods have not been threaded. The rods are manufactured in one side flat and the opposite side sharp. Copper coating is Min. 0.25 mm according to standard UL 467 and IEC 62561.
