Passive Air Terminals

Franklin Air Rod (AT)

These Rods are made up of high conductivity materials as below configurations. according to standards IEC 62561.

Multiple Point Air Terminal (MAT)

Multi point air terminals will do something more than the conventional type air terminal for us if they are mounted on tall buildings or a large entirely metallic surface with consideration for four below conditions.

- Accepting the theory elaborated on IEEE 998 , IEC 62561 , clause 7 (Leader propagation and intersection methods)
- Installing high enough multi point air terminal on the building or concerned structure.
- Implementing a high quality earthing system for the tall building or concerned structure.
- The tall structure means the structure with height more than 150 feet.

Please pay your atiention, we were not talking about the coverage area of air terminal, we were talking about the increase or reduction of strike probability.

For other Air Terminals configuration/sizes please contact Petunia Co. Experts.

Multiple Point Head (MATL)

The multi-point head can be installed directly to the mast and turn the rig into a high length air terminal.

Light Air Terminal (ATL)

Lightweight air rod terminals are made of stainless steel. They have a light weight against their size and have very high strength in stormy weather conditions.

Air Terminal Stud (ATSD)

Petunia's "Air terminal studs" devices can be applied in the mesh method, for flat roofs that can be walked on and driven on Parking decks. The catch mushroom and the cables can either be laid in the concrete or in the joints of the roadway panel. (According standard IEC 62305-3)