Support Clamps
One-Hole Wire Clip (TCW)
Petunia cable clip is suitable for connecting bare conductor to structure. This clamp is simple, affordable and easy to install. (According to IEC 62561)
PVC Covered One-Hole Wire Clip (TCWF)
Petunia PVC covered wire clip is suitable for connecting PVC covered conductor to structure. it can be installed quickly and easily with just a screw and driver.
Two-Hole Wire Clip (THW)
Petunia cable clip is suitable for connecting bare conductor to structure. This clamp is simple, affordable and easy to install. (According to IEC 62561)
Heavy Duty Wire Clamp (TEW)
Petunia wire clamp is suitable for connecting bare conductor to structure. This clamp is simple, affordable and easy to install. (According to IEC 62561)
PVC Covered Two-Hole Wire Clip (TEWF)
This clamp is suitable for installing PVC covered wire on metallic structures that can be used for cables more than 20mm diameter.
Wire Support Clamp (STEW)
Petunia wire support clamp is suitable for connecting bare conductor to structure. This clamp is used to separate the conductor from the surface of the structure. (According to IEC 62561)
Cylindrical Wire Wall Support (CYS1)
Petunia cylindrical wire wall support is suitable for connecting bare conductor to wall flat with maximum 10 mm conductor diameter.
Cylindrical Wire Wall Corner Support (CYS2)
Petunia cylindrical wire wall support is suitable for connecting bare conductor to wall corner with maximum 10 mm conductor diameter.
Plastic Tape Clamp (PTV)
This one-piece clip, with an integral hinged lid, means no lost or dropped lids. The clips are UV stabilized to prevent degradation from sunlight also are non-brittle to protect against cold weather. Fix using a countersunk woodscrew wall plug.
Tape Clip (TC)
Tape Clamp (DJC)
Petunia tape clamp is suitable for connecting tape conductor to structure. It has high mechanical strength and is easy to install. (According IEC 62561)
Back Plate Holdfast (BPH)
Petunia back plate holdfast is suitable to provide distance between tape conductor and structure.
Tape Support Clamp (STC)
Petunia tape support clamp is suitable for connecting tape conductor to structure. This clamp is used to separate the conductor from the surface of the metallic structure. (According to IEC 62561)
Attaching Wire Clamp (AWC)
Petunia attaching wire clamp is suitable for connecting bare wire conductor to structure. This clamp is used to separate the conductor from the surface of the structure.
Double Attaching Wire Clamp (DAWC)
Petunia double attaching wire clamp is suitable for connecting two bare wire conductor to structure. This clamp is used to separate the conductors from the surface of the structure.
Tower Wire Clamp (CWIE)
Petunia tower tape clamp is suitable for connecting tape conductor to tower or mast. This clamp is simple, affordable and easy to install.
Tower Tape Clamp (CTIE)
Petunia tower tape clamp is suitable for connecting tape conductor to tower or mast. This clamp is simple, affordable and easy to install.
Tower Wire Clamp Connection With Cable Lug (PBC)
Petunia tower wire clamp is suitable for connecting wire to tower. This clamp is simple, affordable and easy to install.
Extensible Copper Bonded Steel Ground Rod (GR-CB)
This clamp is used for fastening the lightning tape to steel structure.
Wire Conductor Support (WCS)
Petunia wire support clamp is used for fastening the lightning conductor on roof and wall.
Wire Structural Beam Clamp (MSCC)
These clamps are used for fastening the round wires to steel structure.
"L" Type Wire Conductor Support (LWCS)
Petunia "L" type wire conductor support is used for fastening the lightning conductor on roof and wall.
